Snmp For The Wireless Management System - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

SNMP for the Wireless Management System

On the Maintenance tab, select Remote Management > System > SNMP:
Figure 7-6
• SNMP checkbox: Enable SNMP for the Wireless Management System.
• Read-Only Community Name: The community string to allow the SNMP manager to read
the WMS5316 MIB objects.
• Read-Write Community Name: The community string to allow the SNMP manager to read
and write the WMS5316 MIB objects.
• Trap Community Name: The community name which is associated with the IP address to
Receive Traps.
• IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent from
the Wireless Management System.
• Trap Port: The default port on which SNMP manager receives traps sent from the Wireless
Management System is 162.
• SNMP Manager IP: Restrict access to specified SNMP manager for doing SNMP v1/v2. Set
this as 255.255.255.255 to allow any SNMP manager to access.
When you are finished making changes, click Apply to save your settings.
Maintenance
v1.0, March 2010
7-5