Advanced Wireless Settings For Access Point Groups - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Advanced Wireless Settings for Access Point Groups

This page is for advanced users who wish to control the WLAN settings of the access points
manually.
Figure 3-2
To manually specify the WLAN parameters for access points:
1. Disable the Central RF Management feature from the Basic > RF Management page.
This prevents the Wireless Management System from automatically using RF management
and adjusting power and channel settings for the access point group.
2. Specify the settings in the Advanced Wireless Settings screen (see
3. Click Apply so that your changes take effect.
Wireless Configuration
v1.0, March 2010
Table 3-1 on page 3-4).
3-3