Advertisement
Note: Both devices are included in the SXK30, SXK30B3, SXK30B4, or can be purchased separately.
Note: Not included with the SXS30
When setup is complete, the WAN port on the Orbi Pro WiFi 6 Mini router is connected with an Ethernet cable to a modem or gateway, and the router is connected to power.
Mark the wall where you want to insert the provided anchors and screws, which must be 2.5 in. (63 mm) apart. Insert the anchors and screws, leaving about 0.25 in. (6 mm) of each screw protruding from the wall.
When the screws are placed correctly, the holes at the back of the mounting bracket fit over the protruding screws, allowing you to slide the mounting bracket downward until the tops of the slots are resting on the screws.
You can install the wall mount vertically on a wall only. Do not install the wall mount horizontally or on the ceiling.
The Orbi Pro WiFi 6 Mini router (model SXR30) can be used alone, or supports up to four satellites. The back of the router has one yellow WAN port and three LAN ports. The label on the router displays model SXR30, and the preset WiFi network name (SSID) and password.
If you purchased an Orbi Pro WiFi 6 Mini router with one or more satellites in a kit, the satellites are already paired with the router. If you purchased an additional satellite separately, see Sync an add-on satellite to the router (optional).
If you want to extend your WiFi coverage, you can purchase an Orbi Pro WiFi 6 Mini satellite (model SXS30) separately.
To sync an add-on Orbi Pro WiFi 6 Mini satellite:
Place the satellite at the location where you want WiFi coverage. The satellite must be within range of the router or another Orbi Pro satellite that is connected to the router. The router supports a maximum of four satellites.
For information on optimal placement in home offices see https://kb.netgear.com/31029, or for business and commercial installations see https://kb.netgear.com/000045858/.
To place your Orbi Pro WiFi 6 Mini satellite:
To enable other Orbi Pro features, manage and monitor your Orbi Pro WiFi 6 network and devices, you can log back in to the router web interface using the unique password that you specified during setup, or if you want remote management and advanced services, Insight Pro and Insight Premium subscribers can use the NETGEAR Insight cloud portal and app.
For more information on configuring your device through the router web interface, see the Orbi Pro WiFi 6 user manual, which you can download by visiting netgear.com/support/download.
NETGEAR Insight
Your Orbi Pro WiFi 6 device might come with 1-year Insight included. New users might also be eligible for an Insight Premium 1-month trial subscription. Certain restrictions apply. For more information, visit https://www.netgear.com/insight/.
Orbi Pro WiFi 6 Mini Satellite sync information
When the Orbi Pro WiFi 6 Mini satellite tries to sync with the router, the bar LED lights one of the following colors for several minutes, and then turns off:
Blue
The connection between the router and satellite is good.
Amber
The connection between the router and satellite is fair. Consider moving the satellite closer to the router.
Magenta
The satellite was unable to connect to the router. Move the satellite closer to the router.
If the bar LED lights magenta and does not light white within a couple of minutes, resync the router and satellite. First, press the Sync button on the back of the router, and within two minutes, press the Sync buttton on the back of the satellite. The satellite's bar LED lights white, then lights blue to indicate a good connection, and then turns off.
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.
For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download NETGEAR Orbi Pro WiFi 6 Mini SXR30 - Mesh System Quick Start Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Orbi Pro WiFi 6 Mini that isn't answered in the manual? Leave your question here.