Changing The System Time Settings - Cisco WIP320 User Manual

Using Advanced Phone Features

Changing the System Time Settings

Changing the System Time Settings

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
In most cases, the Unified Communications system time settings are controlled by
a network time server. However, if the Unified Communications system is not
connected to the Internet or if the time server is not reachable, you can set the
system clock from any Cisco IP phone in the system. Be aware that this manual
setting will be lost if the Unified Communications system loses power.
Not available on Cisco SPA301 and Cisco SPA501G
Task
Cisco SPA303 and Cisco
SPA50x Series IP phones
(except Cisco SPA501G)
Instructions
1. Press .
2. Select Time/Date.
3. Enter the Date in the mm/dd/yy format. Press
or for the forward slash. For example, enter
#
10*01*11 for Oct. 10, 2011.
4. Press the down-arrow navigation button, and
then enter the Time in hh:mm:ss format. Press
or for the colon. For example, enter 6*21 for
#
6:21.
5. Press the down-arrow navigation button, and
then enter the time zone Offset in ±H:m:s format.
Press for + or
*
colon. For example, for the U.S. Pacific Time zone,
enter *8*00 for -8:00.
6. Press .
Save
7. Press to close the window. The time setting
is propagated to the UC320W and the other
phones.
for -. Press or
# * #
3
*
*
for the
89