Cisco WIP320 User Manual page 38

Using Basic Phone Functions
Using the Intercom and Paging Features
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Task
Changing your auto-
answer settings
Cisco SPA303 and
SPA50xG models
Cisco SPA525G/G2
Instructions
Not available on Cisco SPA301
By default, all phones are configured to auto-
answer pages. To adjust this setting, follow these
steps:
1. Press .
2. Select Preferences.
3. Select Auto Answer Page, and then press
.
Edit
4. Press to select Yes (auto-answer is
Y/N
enabled) or No (auto-answer is disabled).
5. Press and then press
OK
By default, all phones are configured to auto-
answer pages. To adjust this setting, follow these
steps:
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Select Auto Answer Page.
5. Press the right-arrow or left-arrow navigation
button to select a check mark to enable this
feature or a minus sign (-) sign to disable this
feature.
6. Press .
Save
2
.
Save
38