Table of Contents
Advertisement
Getting Started
Phone Features
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
#
Phone Feature
Message
Waiting/Status
Indicator
(continued)
Ringer switch
3.
Voicemail button
4.
FLASH button
5.
Redial button
6.
Description
•
Orange (solid): Your phone is not registered to the
call control system. This occurs when the phone is
rebooting and has not yet registered.
•
Orange (fast flashing): Your phone's firmware is
upgrading.
•
Orange (slow flashing): Your phone is downloading
firmware.
•
Orange (series of two fast flashes): Your phone has
permanently lost its Ethernet connection. When the
phone is reconnected, it will reboot.
•
Green (slow flashing): Call forwarding or Do Not
Disturb is turned on. (When you lift the handset, you
will also hear an interrupted dial tone.)
Push to the On position to turn the ringer on. Push to
the Off position to turn the ringer off.
Press to access voicemail (if set up by your phone
administrator).
Holds a call or transfers a call.
•
If you are on a call and receive a new call, press
FLASH
to place the first call on hold and answer
the new call. To toggle between the two calls,
press
twice.
FLASH
•
To place a call on hold, press
the call, lift the handset and press
•
To transfer a call, press
extension number or phone number. After the
other phone starts ringing, wait for an answer or
immediately press
transfer.
Press to redial the last number called.
FLASH
. To resume
FLASH
. Then enter the
FLASH
to complete the
FLASH
1
twice.
10
Advertisement
Table of Contents
