Enabling And Using Dial Assistance - Cisco WIP320 User Manual

Using Advanced Phone Features

Enabling and Using Dial Assistance

Enabling and Using Dial Assistance

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
If you enable dial assistance, when you place calls, the screen will display phone
numbers based on the best matched entries in the Directory and Call History lists.
Not available on Cisco SPA301 or Cisco SPA501G.
Task
Enabling or disabling dial
assistance
Cisco SPA50xG models
Cisco SPA525G/G2
Using dial assistance
If enabled
Instructions
1. Press .
2. Select Preferences.
3. Choose Dial Assistance, and then press
.
Edit
4. Press to choose Yes (dial assistance is
Y/N
enabled) or No (dial assistance is disabled).
5. Press , and then press
OK
6. Press to close the menu.
Cancel
1. Press .
2. Select User Preferences.
3. Select Call Preferences.
4. Scroll to Dial Assistance.
5. Press the right-arrow navigation button to enter a
check mark (the feature is enabled) or to clear the
check mark (the feature is disabled).
6. Press .
Save
1. Begin dialing a number. The phone displays
similar numbers that you have dialed in the past.
2. Press the navigation button to scroll down.
3. When a number is selected, press
complete the call.
3
.
Save
to
Dial
66