Authorization; Admin. Account - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 4-14 Wizard Security Levels (continued)
Security Level
Custom Security

Authorization

The Authorization page provides tabs that allow you to control access to the device, as well as to
device configuration and management features. In addition, you may configure certificates for client
and server authentication.

Admin. Account

Use this page to set an administrator password for controlled access to Jetdirect configuration and
status information. The administrator password is shared by Jetdirect configuration tools, such as the
embedded Web server, Telnet, and HP Web Jetadmin. In addition, for selected EIO printers, the
password is shared with the printer (see
If a password is set and you attempt to access Jetdirect print server settings, you will be prompted
for a user name and this password before you are allowed access.
ENWW
Description
SNMP Configuration pages are used to configure specific SNMP settings:
■ Enable SNMPv3: (Full-featured print servers only) Enable SNMP v3 and create an
SNMP v3 account. Creating an SNMP v3 account is not recommended if you
manage devices using HP Web Jetadmin. See SNMP.
■ Enable SNMPv1/v2 read-only access: Enable this option to allow support of current
tools that rely on SNMP v1/v2 for device discovery and status.
The Configuration Review page displays all the current settings that may affect
security. Click Finish to set your basic security selections.
This option proceeds through all available security settings supported by your print
server. For more information on specific parameters and selections, see the tabs on the
Mgmt. Protocols and Authorization
The Administrator Account page is used to enter the administrator password.
The Web Mgmt. page (for full-featured print servers only) is used for HTTPS (secure
HTTP) configuration, including certificates and encryption levels.
The Management Tools page allows configuration of management protocols that are
not secure (such as RCFG, Telnet and FTP firmware updates).
SNMP Configuration pages are used to configure specific SNMP settings:
■ Enable SNMPv1/v2: Enable this option to allow management software that use
SNMP v1/v2. If selected the SNMPv1/v2 Configuration page is displayed to
configure SNMP community names.
■ Enable SNMPv3: (Full-featured print servers only) Enable this option to create an
SNMP v3 account. Creating an SNMP v3 account is not recommended if you
manage devices using HP Web Jetadmin. See SNMP.
The Access Control page is used to set up an Access Control List, if desired to control
host access to the device.
The Print Protocols and Services page is used to enable or disable network printing,
print services, and device discovery protocols that may affect security.
The Configuration Review page displays all the current settings that may affect
security. Click Finish to set your basic security selections.
Printer Password Synchronization
menu pages under SECURITY.
below).
Networking Tab 85