HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 135

Table 8-6 IPv4
Table 8-12 Error
Table 8-5 TCP/IP Configuration Information
Message
STATUS:
HOST NAME:
IPV4 DOMAIN NAME:
IPV6 DOMAIN NAME:
PRIMARY DNS SERVER:
SECONDARY DNS SERVER:
DNS (IPV6)
WINS SERVER:
IDLE TIMEOUT:
ENWW
Section. For IPv6 parameters, see
Messages.
Description
Current TCP status.
READY: Indicates the HP Jetdirect print server is awaiting data over TCP/IP.
DISABLED: Indicates that TCP/IP was manually disabled.
INITIALIZING: Indicates that the print server is searching for the BOOTP server, or
trying to get the configuration file through TFTP. An additional status message may
also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
The host name configured on the print server. It may be truncated.
Not Specified: Indicates that no host name was specified in a BOOTP response or
TFTP configuration file.
NPIxxxxxx: The default name is NPIxxxxxx, where xxxxxx represents the last six
digits of the LAN hardware (MAC) address.
The Domain Name System (DNS) name of the IPv4 domain in which the HP
Jetdirect print server resides (for example, support.company.com). It is not the fully
qualified DNS name (for example, printer1.support.company.com) because the host
printer name is not included.
Not Specified: Indicates that a domain name has not been configured on the print
server.
The Domain Name System (DNS) name of the IPv6 domain in which the HP
Jetdirect print server resides (for example, support.company.com). It is not the fully
qualified DNS name (for example, printer1.support.company.com) because the host
printer name is not included.
Not Specified: Indicates that a domain name has not been configured on the print
server.
The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a primary DNS server has not been configured on the
print server.
The IPv4 address of the Domain Name System (DNS) server.
Not Specified: Indicates that a secondary DNS server has not been configured on
the print server.
The IPv6 address of one or more Domain Name System (DNS) servers.
Not Specified: Indicates that an IPv6 DNS server has not been configured on the
print server.
The IP address of the Windows Internet Naming Service (WINS) server.
Not Specified: Indicates that a WINS server's IP address has not been configured on
the print server.
The timeout value expressed in seconds after which the print server closes an idle
TCP print data connection. Acceptable values are integers between 0 and 3600. A
value of zero turns off the timeout mechanism. The default value is 270 seconds.
Table 8-7 IPv6 Section. For error messages, see
Table 8-12 Error Messages.
HP Jetdirect Configuration Page 125