HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 180

Table C-2 HP Jetdirect Graphical Control Panel Menu (continued)
Menu Item
IPX/SPX
APPLETALK
DLC/LLC
SECURITY
170 Appendix C The HP Jetdirect EIO Control Panel Menu
Submenu Options Additional Options
PROXY SERVER
PROXY PORT
ENABLE
FRAME TYPE
ENABLE
ENABLE
PRINT SEC PAGE
SECURE WEB
Description of settings
Use the Select (or numerical keypad "6") button to
enter each digit or colon. Pressing the Select button
after the last item saves the prefix.
(For printers/MFPs that support this feature)
Specifies the proxy server to be used by embedded
applications in your printer/MFP. A proxy server is
typically used by network clients for Internet access. It
caches Web pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IPv4 address or
fully-qualified domain name. The name can be up to
255 octets.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy
server address.
(For printers/MFPs that support this feature)
Enter the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can be
a value from 0 to 65535.
ON: Enable the IPX/SPX protocol
OFF: Disable the IPX/SPX protocol
Selects the frame type setting for your network.
AUTO (default): Automatically sets and limits the
frame type to the first one detected.
EN_8023, EN_II, EN_8022, EN_SNAP: Frame type
selections for Ethernet networks.
(Ethernet/Fast Ethernet only)
ON: Enable the AppleTalk protocol
OFF: Disable the AppleTalk protocol
ON: Enable the DLC/LLC protocol
OFF: Disable the DLC/LLC protocol
YES: Prints a page that contains the current security
settings on the HP Jetdirect print server.
NO: A security settings page is not printed.
For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
ENWW