HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 179

Table C-2 HP Jetdirect Graphical Control Panel Menu (continued)
Menu Item
ENWW
Submenu Options Additional Options
DHCPV6 POLICY
PRIMARY DNS
SECONDARY DNS
MANUAL
SETTINGS
Description of settings
SETTINGS) to enable and manually configure a TCP/
IPv6 address.
LINK-LOCAL: Use this item to display the IPv6 link-
local address configured on the print server.
DHCPV6: If available, use this item to display stateful
IPv6 addresses controlled by a DHCPv6 server.
ROUTER SPECIFIED: If available, use this item to
display stateless addresses associated with a router.
ROUTER SPECIFIED: (default) The stateful auto-
configuration method to be used by the print server is
determined by a router. The router specifies whether
or not the print server is to obtain its address, its
configuration information, or both from a DHCPv6
server.
ROUTER UNAVAILABLE: If a router is not available,
the print server should attempt to obtain its stateful
configuration from a DHCPv6 server.
ALWAYS: Whether or not a router is available, the
print server will always attempt to obtain its stateful
configuration from a DHCPv6 server.
Use this item to specify an IPv6 address for a primary
DNS server that the print server should use. Use the
control panel navigation or keypad buttons to enter the
address.
Use this item to specify an IPv6 address for a
secondary DNS server that the print server should use
if the primary DNS server is not available. Use the
control panel navigation or keypad buttons to enter the
address.
Use this item to manually set IPv6 addresses on the
print server.
ENABLE: Select this item and choose ON to enable
manual configuration, or OFF to disable manual
configuration.
CHOOSE PREFIX: Use this item to select an IPv6
address prefix from a list of available prefixes
configured on the print server.
NEW PREFIX: Use this item to enter a 16
hexadecimal digit IPv6 address prefix using the colon
hexadecimal syntax. Use the keypad or navigation
buttons to specify each hexadecimal digit or separator
(colon). Use the Select (or numerical keypad "6")
button to enter each digit or colon. Pressing the Select
button after the last item saves the prefix.
ADDRESS: Use this item to enter a 16 hexadecimal
digit IPv6 node address using the colon hexadecimal
syntax. Use the keypad or navigation buttons to
specify each hexadecimal digit or separator (colon).
Graphical Control Panel 169