Application Panel - Honeywell MX8 Reference Manual

Application Panel

Use the Application tab options to select the applications to launch when the device boots up in End-user Mode.
If no application is specified when the Administrator Panel is closed, the MX8 reboots into Administrator mode. If a password
has been set, but an application has not been specified, the user will be prompted for the password before entering
administration mode. The password prompt remains on the display until a valid password is entered.
Option
Filename
Title
Arguments
Order
Internet
Launch Button
Global Key
Global Delay
Default is blank. Move the cursor to the Filename text box and either type the application path or tap
the Browse button (the ... button). The standard Windows CE Browse dialog is displayed. After
selecting the application from the Browse dialog, tap OK.
Default is blank. Enter the Title to be associated with the application. The assumption is that multiple
copies of the same application may need unique titles in order to differentiate them in the Switchpad.
Default is blank. Enter the command line parameters for the application in the Arguments text box.
Default is 1. Enter the Order in which the application is to be loaded or presented to the end-user.
Applications are launched in lowest to highest number order and do not need to be sequential.
Default is Disabled. Enable the Internet checkbox to use the End-user Internet Explorer (EUIE.EXE)
When the checkbox is enabled, the Internet Menu and Internet Status are available. See the section
titled End-user Internet Explorer (EUIE) for more details.
See following section titled
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when switching
between applications. The Global Key default key sequence must be defined by the AppLock
Administrator. The Global key is presented to the end-user as the Activation key.
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting to
run after reboot.
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a Global
Explanation
Launch Button.
4-49