Front Panel Features - Honeywell Dolphin 6110 User Manual

Front Panel Features

Note: Your Dolphin model may differ from the model illustrated; however, the features noted are standard for all
Dolphin 6110 models unless otherwise indicated.
Scan/Decode LED
The LED lights red when you press the Scan trigger in scanning applications. The LED lights
green when a scanned bar code is successfully decoded.
The LED lights red while the battery is charging.
The LED lights green when the battery charging is completed. The LED lights blue during soft
and hard resets.
The LED is user-programmable. Please refer to the explanation in the SDK document.
Honeywell D6x10 Device SDK for Windows CE 6.0 > Visual C++ Development > Device API >
Functions > devSetLEDState
Keypad
28-key numeric keypad (alpha shifted) is available.
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a 2.8" transmissive active matrix, 65k color LCD display with a backlight, QVGA
(240 x 320 resolution); see
resistive touch.
Dolphin 6110s ship with a screen protector already installed over the touch screen lens
to help prevent damage to the touch screen. Do NOT remove this screen protector before
initial use. Honeywell recommends using screen protectors, especially for applications
that require high volume interfacing with the touch screen. For more information, see
Using Screen Protectors
contacting your Honeywell sales representative.
For touch screen input, use the stylus included with the terminal or your finger. The
3-2
Touch Screen
Display (screen
protector
installed at the
factory)
Scan key
Navigation
keys
Display Backlight
on page
LED
Keypad (28-key
shifted alpha
numeric)
Power key
Software
Reset Key
on page 3-3. The touch panel is a 4-wire analog
3-3. You can purchase additional screen protectors by