Operation; Usb Memory Connection; Start Up Process; Configuration And Display Options - Hitachi PC-ARF Technical Catalogue

Table of Contents

Advertisement

6 Building air conditioning controls
CSNET Manager LT/XT

6.2.4 Operation

6.2.4.1 USB memory connection

1 Plug in the USB memory in the USB port of the CSNET Manager.
2 Program starts up automatically.
3 Please wait until a window pops up.
4 This windows allows browsing the contents of the USB memory (instruction manuals in PDF files, system recovery,
etc.).

6.2.4.2 Start up process

1 Connect the power cable.
2 Connect the LAN1 cable.
3 Switch ON the CSNET Manager.
4 Wait until the screen is started and CSNET Manager software is launched automatically.

6.2.4.3 Configuration and display options

Through the
"Configuration
CSNET WEB.

Version and updates
Version and updates gives the information to the user about which software is installed on the CSNET WEB device.
If the internet connection is properly configured, it can download updates for the HARC and install them just by clicking
the button.
C A U T I O N
HARC cannot be updated through a proxy.

Change password
The Change button beside Password setting opens the Change password panel.
To change your password:
-
Enter the installer password. (The default factory password is "Installer").
Enter the new password.
-
-
Repeat the new password to confirm it.
-
Click the "OK" button to validate the changes and return to system configuration window.
N O T E
Only Installer password may be changed for CSNET Manager Server. User password will no longer be used for CSNET Manager Server.

Installation name
The name of the installation is the title of the main window. This lets you identify where CSNET WEB is connected.
To change the name of the installation first enter the name you want and then click on the Change button by the "Installation
Name" line.
This takes you to the main window, where you can see that the title of the main page has changed.
526
526
TCGB0106 rev.0 - 12/2014
panel",
"Network settings"
is possible to configure the following updates for the HARC and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents