Hitachi PC-ARF Technical Catalogue page 379

5 Centralised remote controls
PSC-A32MN

Restore settings
1 Select "Restore Settings" on the "Service Menu" screen.
N O T E
This function cannot be selected when remote control switch operation is prohibited, an external input contact is ON, or outdoor unit capac-
ity control is not cancelled. Cancel these parameters before performing "Restore settings".
2 Tap "OK" at the confirmation screen.
N O T E
If "Cancel" is tapped, the screen returns to "Service Menu".
3 A second confirmation screen is displayed. Tap "OK" here to restore the settings. The screen changes after several
seconds, and a check of the connections of the system starts.
N O T E
If "Cancel" is tapped, the screen returns to "Service Menu".
(2)
Information
It is also possible to restore the settings when the "Start-up"
screen is being displayed.
1 Tap the "Restore" at the lower right corner of the "Start-
up" screen for more than 5 seconds.
* Restore settings is not displayed when remote control
switch operation is prohibited, an external input contact is
ON, or outdoor unit capacity control is not cancelled.
2 Connection check process starts after a few seconds.
3 When the process for connection check is finished, the
"Date and Time Settings" screen is displayed. (Refer to
Date and Time Settings)
363
TCGB0106 rev.0 - 12/2014
(1)
(3)
5
Restore Settings