Hitachi PC-ARF Technical Catalogue page 330

5 Centralised remote controls
PSC-A32MN
"Monitor 2 (Block)"
Current display
Indicates the current display
(groups in block)
"Menu" button
"Icon Guide" but-
Displays menu
ton
items such as
"Filter Sign Re-
Displays an expla-
set", "Schedule
nation of the Icons.
Setting", etc.
N O T E
The screen image may be different from the actual screen.
314
TCGB0106 rev.0 - 12/2014
Unit state
Indicates the state of the unit with
icons like filter sign, demand, etc.
"Alarm Info." "Setting by Block" button
button
Changes the setting of all
Provides
the groups in the target
detailed infor-
block simultaneously.* This
mation about
function can be used when
abnormalities.
Control Mode (Run/Stop
Only) is in "Disable" mode.
If Control Mode (Run/Stop
Only) is in "Enable" mode,
the Run/Stop operation will
be switched by tapping the
target.
Block tab
Changes the monitor display into
"Block" or "All Groups" display.
Group button
Indicates the operation status
Green: Running
Grey: Stopped
Red: Abnormal
If the target group button is tapped,
"Settings" of the target group screen
will be indicated.
"Run by Block" button
Runs the operation of all groups in the
target block simultaneously.
"Stop by Block" button
Stops the operation of all groups in the
target block simultaneously.
"Display icons" button
"Display Condit." button