Hitachi PC-ARF Technical Catalogue page 117

4 Individual remote controls
PC-ARF
2 Select "Yes" by pressing " " or " " and press "OK". The set-
ting will be confirmed and the screen will return to the normal
mode.

Setting of Total Heat Exchanger
This function is used to change the ventilation mode of the total heat exchanger.
N O T E
This function is available only when the total heat exchanger is connected. This function cannot be set when the unit is operating.
1 Select "Total Heat Exchanger SET" from the menu and press
"OK". The total heat exchanger set is displayed then.
2 By repeatedly pressing " " or " ", the indication is changed
in order of AUTO VENTI
VENTI. Select the operation target and press "OK", then the
confirmation screen is displayed.
3 Select "Yes" by pressing " " or " " and press "OK". The set-
ting is confirmed and the screen returns to the normal mode.
101
TCGB0106 rev.0 - 12/2014
THEX VENTI Normal
OK
VENTI
Fix desired mode?
Yes
OK
SEL.
OK
Menu
Louver Setting
Louver Open/Close
VENTI
Total Heat Exchanger SET
Motion Sensor Setting
OK
SEL.
OK
Total Heat Exchanger SET
VENTI Mode
OK
ADJ
OK
Total Heat Exchanger SET
Fix setting of
total heat exchanger?
Yes
OK
SEL.
No
OK ENT. RTN.
4
15:10(Fri)
02
/
03
OK ENT. RTN.
THEX VENTI
OK ENT. RTN.
No
ENT. RTN.
OK