Remove And Replace The Solid State Drive (Ssd) - Cisco NCS 1014 Manual

Remove and Replace the Solid State Drive (SSD)

Figure 6: Removing the Fan Module
1
What to do next
Install Fan
Remove and Replace the Solid State Drive (SSD)
Use this procedure to remove and replace the SSD in the Cisco NCS 1014 chassis.
Step 1 Using a T15 six lobe/slot screwdriver, loosen the lone captive screw on the SSD.
Remove and Replace Cisco NCS 1014 Modules
8
Module.
Remove and Replace Cisco NCS 1014 Modules
Fan module