Cisco NCS 1001 Manual
Hide thumbs
Also See for NCS 1001:
- Configuration manual (36 pages) ,
- Start manual (40 pages) ,
- Hardware installation manual (58 pages)
Advertisement
Quick Links
Cisco NCS 1001 Overview
This chapter provides an overview of Cisco NCS 1001.
•
•
•
•
•
Cisco NCS 1001 Overview
Cisco NCS 1001 (NCS1001-K9) is 1 RU chassis that addresses the growing bandwidth needs of data center
DWDM applications. It provides a DWDM line system that is optimized for data center environments and is
optimized for point-to-point applications at maximum capacity. NCS 1001 supports up to three optical modules.
The modules can be amplifiers or protection switching modules.
NCS 1001 has the following components:
• Removable control card
• Four removable fans
• Two removable 600W AC/DC or DC/DC power supply modules (PSU)
• Three slots for optical modules. Two Optical Amplifier Modules ( NCS1K-EDFA) and a Protection
Cisco NCS 1001 Overview, page 1
Optical Amplifier Module, page 5
Protection Switching Module, page 6
Product IDs, page 7
LEDs in Cisco NCS 1001, page 8
Switching Module (NCS1K-PSM) can be inserted in these slots.
The optical modules can be inserted in slots 1 to 3 as shown in the following figure. The optical modules
can be inserted and removed from the slots while the system is operational. In amplified configuration,
the Optical Amplifier module can be inserted in any slot. In (section) protected configuration, the protect
Optical Amplifier module is inserted in slot 1, Protection Switching Module in slot 2, and working
Optical Amplifier module in slot 3.
Hardware Installation Guide for Cisco NCS 1001
1
Advertisement
Related Manuals for Cisco NCS 1001
Summary of Contents for Cisco NCS 1001
- Page 1 LEDs in Cisco NCS 1001, page 8 Cisco NCS 1001 Overview Cisco NCS 1001 (NCS1001-K9) is 1 RU chassis that addresses the growing bandwidth needs of data center DWDM applications. It provides a DWDM line system that is optimized for data center environments and is optimized for point-to-point applications at maximum capacity.
- Page 2 The empty slots must be inserted with the filler optical modules or filler PSUs as appropriate to guarantee safety and system cooling compliance. See Figure 1: Cisco NCS 1001 Front View, on page 2 Figure 3: Cisco NCS 1001 Rear View, on page 3 to identify the slots for optical modules and PSUs respectively.
- Page 3 Cisco NCS 1001 Overview The slot numbers are also specified on the front panel label. Figure 2: Cisco NCS 1001 Front View UDC (user data channel) for optical modules 1 and 2 Two USB 2.0 ports and one UDC for optical module 3 Two USB 2.0 ports and one 10/100/1000 LAN electrical management interface...
- Page 4 Class 1M Laser Product Label The Class 1M Laser Product label is shown in the following figure. Class 1M is guaranteed by the Automatic Power Reduction procedure. Figure 4: Class 1M Laser Product Label Hardware Installation Guide for Cisco NCS 1001...
-
Page 5: Optical Amplifier Module
◦ 23dBm output power @ LINE-TX port • ADD/DROP OSC channel supports both 1510nm and 1610nm +/-10nm • OCM assesses channel presence and Gain regulation and per channel power monitoring. Figure 5: EDFA Front View Hardware Installation Guide for Cisco NCS 1001... -
Page 6: Protection Switching Module
◦ Forces the switch in the remote site by opening one of the two line paths (by putting the related VOA in AVS). • In RX section: ◦ Selects the signals from working or protection line. Each line is monitored through a PD. Hardware Installation Guide for Cisco NCS 1001... -
Page 7: Product Ids
Product ID Description NCS1001-K9= Network Convergence System 1001 line system 3 slots NCS1K-CNTLR2= Network Convergence System 1001 Control card NCS1K-EDFA= Network Convergence System 1001 amplifier module NCS1K-PSM= Network Convergence System 1001 protection module Hardware Installation Guide for Cisco NCS 1001... -
Page 8: Leds In Cisco Ncs 1001
Green The unit is operating correctly. The unit has one or more errors detected. The control card is not present or not properly inserted. Green The control card, BIOS, and software are functional. Hardware Installation Guide for Cisco NCS 1001...