Advertisement
Remove and Replace Cisco NCS 1014 Modules
Caution
Step 1
Push and hold the spring-loaded lever toward the left with your thumb (unlock position).
Figure 5: Spring-Loaded Lever in Holding or Unlock Position
1
Step 2
Holding the handle with one hand and supporting the fan module with the other hand, gently pull it out of the chassis.
Online insertion and removal (OIR) duration for the fan module at 30℃ ambient temperature is five minutes.
Remove and Replace the Fan Module
Sping-loaded lever
Remove and Replace Cisco NCS 1014 Modules
7
Advertisement
