A2 Tools And Auxiliary Equipment; A2.1 Customer-Supplied Materials And Equipment For Installation; And Commissioning; A2.2 Materials - GE GL 310 F3/4031 P/VR Operating Instructions Manual

A2 Tools and Auxiliary Equipment
A2.1 Customer-Supplied Materials and Equipment for Installation

and Commissioning

A2.2 Materials
A2.3 Hoisting and Climbing or Lifting Equipment
A2.4 Tools, Test Equipment and Auxiliary Equipment
REV6
/REV7
Customer-supplied materials and equipment are not included in the
order or supplied by the manufacturer. They must be provided at
the site by the customer.
Materials and equipment listed in sections A2.4 to A2.9 may be
purchased from the GE Service Germany.
- Foundation including anchor bolts, nuts, and washers
- Earthing (grounding)
fasteners
- Supports / lattice supports conforming to GE Grid GmbH
drawings
- High voltage terminal pads including fasteners
- Gas for filling the breaker
- Squared timbers and boards on which pole columns can rest
before installation.
- Crane of sufficient lift height and load-carrying capacity
- Slings and lifting tackle of sufficient load-carrying capacity
- Ladders or lifting platforms.
- Gas-filling device with pressure reducing valve and type Dilo DN8
coupling
- SF leak detector
6
- Multimeter
- Measuring device for determining operating times
- Measuring device for determining contact resistance
- Assembly tools based on our tool recommendations
- Metal brush with stainless steel bristles.
OI 248 (EN)
T A
OOLS AND UXILIARY
conductors including
E
QUIPMENT
terminals and
109