Table of Contents
Advertisement
30 Series Network Video Recorder User Guide
Note that multiple alarms can be triggered by one incident. See
44
for how to configure the event settings.
If an event is configured with a recording action, there will be a play button
the alarm message.
Figure 7-12 Event Panel 2
Click
and the event playback window will begin playback of a footage taken 10 seconds
before the occurrence of an alarm. The playback of an alarm-triggered recording will normally
last for one minute. If, however, you configured a shorter pre- and post-alarm recording time,
your alarm recording may be slightly shorter. The default for pre- and post-alarm buffer time
are 5 seconds and 20 seconds.
Figure 7-13 Event Clips
82
View live video: displays the live view streaming instead of the alarm
recording.
Begin the event playback.
Pause the current playback.
Mute or unmute the audio with the current playback. Drag the controller to
change the audio volume level.
Setting-Event-Event
on page
to the left of
Advertisement
Table of Contents
