Setting-Camera-Ptz Settings; Figure 6-17 Motion Detection - Honeywell HN300401 Series User Manual

Figure 6-17 Motion Detection

Note
To set up a detection window:
1. Select a camera by a single click in the camera list.
2. Click and drag to draw a rectangular detection window.
3. Pull the detection area level up to a preferred position. An object must be larger than the
detection area to trigger an alarm.
4. Select a Sensitivity level using the slide bar.
5. Click Apply for the configuration to take effect.
Note

Setting-Camera-PTZ settings

Please see Configuring PTZ Settings
Up to 5 ROI windows can be created for a camera.
To have recordings on event trigger, you need to set up event schedule and
create regular events at first. Please see
an Event on page 44.
on page 19.
Schedule on page 39 and
Settings
Creating
43