Retrieve Diagnostics File Button - Cisco ONS 15454 DWDM Manual

Chapter 1 General Troubleshooting
Figure 1-15
Click Lamp Test.
Step 2
Watch to make sure all the port LEDs illuminate simultaneously for several seconds, with the following
Step 3
durations:
•
•
•
Click OK in the Lamp Test Run dialog box.
Step 4

1.4.2 Retrieve Diagnostics File Button

When you click the Retrieve Diagnostics File button in the Maintenance window, CTC retrieves system
data that can be off-loaded by a Maintenance or higher-level user to a local directory and sent to
Technical Support for troubleshooting purposes. The diagnostics file is in machine language and is not
human-readable, but can be used by Cisco Technical Support for problem analysis. Complete the
following task to off-load the diagnostics file.
In addition to the machine-readable diagnostics file, the ONS 15454 also stores an audit trail of all
Note
system events such as user logins, remote logins, configuration, and changes. This audit trail is
considered a record-keeping feature rather than a troubleshooting feature. Information about the feature
is located in the "Maintain the Node" chapter of the Cisco ONS 15454 DWDM Procedure Guide.
78-17742-02
ONS 15454 Node View Diagnostic Window
For tri-color LEDs: three 5-second cycles
For dual-color LEDs: one 5-second cycle and one 10-second cycle
For the AIC or AIC-I: one 15-second cycle
1.4.2 Retrieve Diagnostics File Button
Cisco ONS 15454 DWDM Troubleshooting Guide, R7.0.1
1-33