Where To Program The Keys - GE Voluson S6 Basic User Manual

Programmable Keys

14.1 Where to program the keys

14-2
There are three different kinds of keys which are programmable, P1, P2, P3, P4; Start Exam
and End Exam. So there are six keys altogether. They are all programmable for printing,
sending and saving data.
How to use the P1, P2, P3, P4 key
Use the trackball and the trackball buttons to press a P-key. The active P-key, i.e. the one that
can be pressed, is surrounded by a yellow frame, like in the illustration above.
How to program the different kinds of keys:
•
on page 14-4 )
P1 - P4 ('P-keys'
•
Start Exam ('Start Exam Button'
•
End Exam ('End Exam Button'
The keys can be programmed in System Setup - Connectivity - Button Configuration
Press the [Utillities] key to enter Utillities menu.
Select [System Setup] to enter System Setup.
Select [Connectivity].
Select the [Button Configuration] filing card.
Now you are in the Button configuration menu, tab - overview :
on page 14-9 )
on page 14-10 )
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4