Continuous Wave Doppler Mode (Cw Mode) - GE Voluson S6 Basic User Manual

Doppler Modes

8.2 Continuous Wave Doppler Mode (CW Mode)

8.2.1 CW Main Menu
Note
8-8
In scan and freeze mode it is possible to switch between PW menu, CF menu and the
appendant Submenus to readjust the settings.
2. PW + 2D Mode + Power Mode (PD)
In scan and freeze mode it is possible to switch between PW menu, PD menu and the
appendant Submenus to readjust the settings.
The CW mode is subdivided in two groups. In these groups you will see how to use CW mode
and how to adjust the CW settings.To use the CW mode: See 'CW Main Menu' on page 8‐8
for more information.
To adjust CW setting: See 'CW Sub Menu' on page 8‐12 for more information.
To use special utilities: 'Utilities'
This mode only works with selected probes. See 'Probes and Biopsies' on page 5‐1 for more
information.
[CW Mode] key (hard key)
Press the [CW] key to activate the CW mode in the preparation mode. First only the CW-
cursor appears on the active 2D image.
To start and use the CW mode: 'CW Operation'
To adjust the CW settings, review: 'CW Sub Menu'
The "CW Main" menu appears on the menu area (scan mode).
on page 13-2 ' and 'Gray Map' on page 6-22
on page 8-9
on page 8-10
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4