Vcad Heart - Volume Computer Aided Display - GE Voluson S6 Basic User Manual

Volume Mode

9.14 VCAD Heart - Volume Computer Aided Display

9-136
1. Press the left trackball key to start drawing a path along the area you want to cut out.
2. Press again to set the path's endpoint. If the path is not closed, the software will connect
the start and end point with a straight line.
3. The area within the path is cut out and inserted as new volume.
To add or remove volumes:
•
Point the cursor to an auto-generated volume and press the upper trackball key to
remove it.
•
Point the cursor to a low echogenic object in the image, which was not counted by the
algorithm, and press the upper trackball key to add it to the list.
To merge volumes:
1. Press the right trackball key to start drawing a path that encloses or passes the volumes
you want to merge.
2. Press again to set the path's endpoint. If the path is not closed, the software will connect
the start and end point with a straight line.
3. All volumes along the path now appear as a single segment.
When follicles are defined and rendered they can be viewed in full screen by using the [Single
Screen Format] key on the menu area: 'Button description'
In Full screen the 3D follicle can also be rotated: 'Cine Calculation'
General: VCAD Heart is an option. If this option is not installed, the [VCAD Heart] key is
hidden.
on page 3-11
on page 9-57
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4