System Setup - GE Voluson S6 Basic User Manual

Utilities and System Setup
13.1.6.4 Changing Password
Note

13.2 System Setup

13-12
When Lock Screen is active, you can also change the existing password. Press the the
[Change PWD] button. The following dialog appears:
1. Enter the current password.
2. Then enter and retype the new password.
A valid password must be at least 6 characters long and has a maximum length of 80
characters. A password must contain at least 2 non-letter characters, ..9 or ! @ # $ % ^ * ( ).
3. Press [Save&Exit] to save the new password, disable Lock Screen and return to the
previous operating state. If you want to discard your new password, press [Exit] and
return to the Lock Screen dialog.
Introduction
Diverse dialog pages and windows on the system setup desktop support modifications of
system parameters.
The System Setup desktop offers different Pages:
•
(chapter 'General' on page 13-15 )
General
•
(chapter 'Administration' on page 13-27 )
Administration
•
(chapter 'Connectivity' on page 13-30 )
Connectivity
•
(chapter 'Backup' on page 13-47 )
Backup
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4