Speckle Reduction Imaging (Sri); Image Orientation; Multi Format - GE Voluson S6 Basic User Manual

2D Mode

6.2.16 Speckle Reduction Imaging (SRI)

6.2.17 Image Orientation

6.2.18 Multi Format

6-10
•
If the [XBeam CRI] function is enabled in 2D Mode, it is also used in 3D preparation
mode and during a Static 3D acquisition.
•
The CRI can also be used in Virtual Convex mode.
'Speckle Reduction Imaging (SRI)'
(Left/Right, Up/Down)
With this function the image orientation on the screen in relation to the patient is alternated
between left and right without rotating the scan head itself. The orientation marker shows the
current orientation. For the relationship between marker and design of the probe:
Switch on the [left/right] key on the control panel (2D main menu) to alternate between left
and right image orientation.
Switch on the [up/down] key on the control panel (2D main menu) to alternate between up
and down image orientation.
Remark:
•
The Orientation marker is green in an active 2D image, and white in a frozen Dual or
Quad image.
The "Multi Format" keys [Dual] and [Quad] allows you to display several 2D mode images
simultaneously on the screen. The upper trackball key and the format keys themselves change
between the images.
on page 9-46
Chapter 5 .
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4