Sono Render Start - GE Voluson S6 Basic User Manual

Volume Mode
Note

9.6 Sono Render Start

9-94
If the [ROI] key is highlighted, you have to press [Curve] key first and then [Reset].
Select the Init position
Select the [More...] key at the top right corner of the menu area.
The "3D/4D Sub Menu" appears
This key resets the rotations of a volume section to the initial (start) position.
The center of rotation is in located in the center of the scanned volume.
Select the Render Mode
The "Render Mode" menu appears on the menu area.
For details: 'Render Mode - Image Type and Render Algorithm'
Invoke the Sub Menus
The "3D/4D Sub Menu" appears on the menu area.
For further details: 'Sub Menus'
Change between different "Visualization" modes In the "3D/4D Mode" menu you can change to
different "Visualization" modes by using L/R, U/D hard key on the control panel.
General:
Sono Render Start automatically finds the render start position to easily separate solid tissue
in front of the render object.
The "Sono Render Start" algorithm "looks" for the transition from solid tissue to liquid and
positions the "Render Start" into the liquid area.
If the analysis finds a valid result, the current Render Start area will be replaced by the new
one, if not a temporary warning appears on screen.
The Render Box Size transverse to the render direction and the Render Box Position will not
be changed.
The Sono Render Start can be activated via the [Auto] key on the user interface, if:
•
The aquisition mode is "3D read" or "4D read/write" (not possible in in Vol. pre)
•
Edit mode is "On"
•
Double click: Clear all Sono Render Start changes
When Sono Render Start is activated the current displayed 3D data set is used for analysis
process and the new found Render Start Area will be displayed graphically on the Render Box
(1) (green line on A and B image).
on page 9-43
Voluson® S6/S8 Basic User Manual
on page 9-72
5433669-100 Revision 4