Mcf Mode (M Color Flow Mode) - GE Voluson S6 Basic User Manual

M Mode
7.3.2 Enhance
7.3.3 Dynamic Control
7.3.4 Display Size
7.3.5 Display Format

7.4 MCF Mode (M Color Flow Mode)

7-8
The Reject state is displayed in the Image Info area on the screen.
Reject range max.: 255 Reject range min.: 0 step size: 5
With the "Enhance" function the echo information is digitally processed such that certain
existing information becomes easily visible (e.g., adjacent media layers). Due to the Enhance
function a finer, sharper impression of the image is produced.
Six steps are possible: 0, 1, 2, 3, 4, 5 (recommended: 0, 1, 2, 3)
The Enhance state is displayed in the Image Info area on the screen.
"Dynamic Control" allows you to enhance a part of interest of the grayscale to make it easier to
display pathology. You can select between twelve different Dynamic control curves.
Dynamic control is displayed in the Image Info area on the screen.
Dynamic Control: 1 to 12
Remarks:
•
The appearance of the gray values depends also on the selected gray map. To select a
M mode gray map: 'Gray Map'
See 'Size' on page 8‐36 for more information.
See 'Format' on page 8‐38 for more information.
Color Flow Mode and Color M Mode are Doppler modes intended to add color-coded
qualitative information concerning the relative velocity and direction of blood flow within the 2D
mode or M mode image. Color Flow overlays color on the M mode trace using velocity and
variance color maps. The Color Flow wedge overlays the 2D mode image and M mode
timeline.
The description of MCF mode is subdivided in two groups:
•
To use the MCF mode:
'MCF Main Menu' on page 7-9
•
To adjust MCF setting:
on page 7-11
'MCF Sub Menu'
on page 6-22
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4