Table of Contents
Advertisement
Notes:
If your recording VCR is
equipped with the S VIDEO
INPUT connector, you can
use supplied S VIDEO
connecting cable to connect
to the S VIDEO OUT
connector.
lf your recording VCR is a
monaural unit, make
connections using the
VCM-910MS/920MS cable
{not supplied).
When connecting the VCRs,
do not connect both LINE IN
and LINE OUT jacks on your
VCR simultaneously. Doing
so may cause a humming
noise.
This VCR (Player)
Another VCR
(Recorder)
Editing onto Another VCR
Here's how to use this VCR as the playback VCR and another VCR as the
recording VCR.
This VCR (Player)
a
{
ay
are
MONITOR OUT
Another VCR (Recorder)
LINE OUT
:
VIDEO | (Yellow)
a
| ae
AUDIO L (White)
eee
AUDIO R | (Red)
—
=
VIDEO IN
(Yellow)
A a
AUDIO L IN (White)
AUDIO R IN (Red)
Supplied audio/video cable
=>
oN
'Signal flow
X
Before you begin
*
Press the EDIT button so that the EDIT indicator lights up in the display window of
the VCR.
If your recording VCR has an editing function, it should also be selected to
improve reception.
+
Make sure that the audio/video cables are connected to the LINE OUT jacks. If
they are connected to the MONITOR OUT jacks, the on-screen display will be
recorded.
Operation
1 Turn on another VCR (recorder) and insert a blank cassette.
2 Insert a source cassette into this VCR (player).
3 Locate the playback start point and select the playback pause mode on this VCR
(player).
4 Locate the recording start point and select the recording pause mode on another
VCR (recorder).
5 Press il PAUSE on both VCRs.
For best results, press I! PAUSE on this VCR (player) just before pressing Il
PAUSE on another VCR (recorder). When you've finished editing, press
BH STOP
on both VCRs.
Tape Dubbing
63
Advertisement
Table of Contents
