Sony Hi8 EV-S3000 Operating Instructions Manual page 21

VCR Setup (Advan
iced Cable)
1 Set the RF UNIT on the VCR's rear panel to 3CH or
4CH.
If you made A/V connections, skip this adjustment.
Details are on page 80.
Set to whichever channel is not used in your area.
If both are used, pick either channel. !
2 Set the A/B switch to "A".
3 Set NORMAL/CATV to CATV.
Press MENU.
Details are on page 25.
Select TUNER PRESET.
4 Preprogram the cha
nnels into the VCR.
Press MENU.
Details are on page 25.
Select TUNER PRESET.
Select AUTO PRESET, |
then press EXECUTE.
5 Add the cable box output channel (usually 2, 3, or
4).
Press MENU. Select TUNER PRESET.
MENU TUNER PRESET cH
ig Oe, yore cay SNOPMSCATY
| TOMER => Mr eens cr oe
| Wen, Ro, pen ener ben oonput ae
; Add the cable box output
' channel (usually 2, 3 or 4).
| For example, press 3 and
| ENTER, set to ADD, then
| press EXECUTE.
Details are on page 26.
Clock Setting
1 Open the cover of the Remote Commander.
2 Press CLOCK SET.
3 Press DAY to set the date, month and year.
4 Press H (hour) and M (minute) under the TURN
OFF section to set the hour and minute.
~ wo
—— TRANSMIT
5 Transmit the setting to the VCR with TRANS, and
close the cover.
Details are on page 24.
Hookups and Getting Started
21