Sony Hi8 EV-S3000 Operating Instructions Manual page 59

During Playback
You can re-record onto an unwanted portion of a pre-recorded cassette. Use the
EDIT SHUTTLE ring on the VCR or the SHUTTLE ring on the Remote
Commander.
1 Press tl PAUSE at the end of the unwanted scene during playback.
The VCR enters playback pause mode.
2 Press COUNTER RESET to set the linear counter to "OHOOMO0S".
3 Turn the ring until the beginning of the unwanted scene appears on the screen.
When you release the ring, the VCR enters playback pause mode. Use 411
FRAME I to rewind or advance the picture frame by frame for searching more
specific points.
4 Press @ REC.
The VCR enters recording pause mode.
5 Select a new program for re-recording.
Select the channel or change the input by pressing CHANNEL/INDEX +/- or
INPUT SELECT.
6 Press Il PAUSE when the scene to be recorded begins to appear on the screen.
Recording begins.
eg oe _
7 Prese@P SLOP when the linear counter shows "OHOOMOOS".
Wil| Sep
Note
The picture may be distorted a
moment at the cut-out point
(recording end point).
Cutting out the Unwanted Scenes — SHUTTLE EDIT 59