Table of Contents
Advertisement
ines
Notes
When the cassette reaches
the end
The cassette rewinds to the
beginning and the power
remains on.
If the tape is ejected when the
REC buttons are pressed
The tab on the cassette is slid
out. Slide the tab in or use a
new cassette.
Recording TV Programs
1 Insert a cassette.
The VCR turns on automatically (Auto power on).
2 Turn on the TV.
3 If your TV is connected to both VHF/UHF OUT and MONITOR OUT (or LINE OUT)
on the VCR, select the input for the VCR.
If your TV is connected only to VHF/UHF OUT on the VCR, select the channel for
the VCR (Ch 3 or Ch 4).
4 If your TV is connected only to VHF/UHF OUT, then press TV/VTR so that the VTR
indicator lights up. Skip this step if your VCR is connected to both VHF/UHF and
MONITOR OUT (or LINE OUT).
5 Press INPUT SELECT to light TUNER in the display window of the VCR. Select
the channel to be recorded with CHANNEL +/- or channel number buttons.
6 Select SP or LP with TAPE SPEED (SP/LP).
To select the best recording tape speed, see "Maximum recording time of a
cassette" on page 30.
7 Press the two @ REC buttons on the Remote Commander at the same time, or the
REC button on the VCR.
The REC recording indicator lights up in the display window of the VCR.
To stop recording
Press m STOP.
To pause recording
Press tf PAUSE. To resume recording, press If PAUSE. It the recording pause
exceeds approximately 7 minutes, the VCR stops.
Pausing
Technique 1
You can stop recording an unwanted scene and resume recording smoothly.
1 Press i! PAUSE when an unwanted scene appears.
Recording will stop and the VCR enters recording pause mode.
2 Press Il PAUSE at the desired point to release pause mode.
Recording resumes from the point set in step 1.
Technique 2
When an unwanted scene has already started recording, you can rewind the cassette
to the desired point, have the VCR standby in recording pause mode, and resume
recording when the unwanted scene is over.
1 Press il PAUSE to set the VCR to recording pause mode.
2 Turn the EDIT SHUTTLE ring on the VCR to the left to search for the point from
which you wish to continue recording.
3 Release the EDIT SHUTTLE ring on the VCR at the desired point.
After an instant in still mode, the VCR automatically enters recording pause mode.
Advertisement
Table of Contents
