Kenwood NEXEDGE NX-200 Function Reference page 371

12 FleetSync
12.7 Sending and Receiving a Short Message (Short Data Call)
Operating the Transceiver
 Sending a Short Message in Short Message Mode
1
Select one of the following operations to place the transceiver in Short Message Mode.
• Press the SDM (FleetSync/NXDN) key.
The transceiver enters Short Message Mode. In this case, a
Short Message is addressed to a Target Fleet/ ID.
• Press the Selcall + SDM (FleetSync) key.
Pressing the Menu ([
target transceiver's Selcall ID places the transceiver in Short
Message Mode.
Or, the transceiver enters Short Message Mode by a user
pressing the Menu key or using a keypad. In this case, the
following operations are identical.
2
Enter a Short Message.
A maximum of 48 characters can be entered. Refer to
Deleting Characters on page 52
3
Press the Side 2 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), the
switch.
The transceiver sends the Short Message.
FUNC (K)/Ver 4.00
]) or [*] key after a user selects the
Entering or
for entry methods.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Square key (Mobile), or the
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX
PTT
337