Kenwood NEXEDGE NX-800 Specifications

GENERAL FEATURES
• 25 W (136-174 MHz) Models
• 25 W (400-470 MHz) Models
• Meets ETSI EN Standards
• 512 CH-GID / 128 Zones
• Dash & Remote Mount
• 14 Character Alphanumeric Aliases
• Backlit Dot Matrix LCD
• Function/Status LCD Icons
• Date & 12/24 Hour Time Clock
• Transmit/Busy/Call Alert/Warn LED
• On/Off Power Control
• 4 Up/Down Selectors
• 6 Front PF Keys
• Emergency/AUX Key
• 4W Speaker Audio
• Emergency Call Features
• Lone Worker
• Multi-Language Display
• DB-25 Accessory Connector
• 9 Programmable AUX I/Os
• 2 Programmable AUX Outputs
®
• KPG-111D Windows FPU
• Flash Firmware Upgrading
• MIL-STD-810 C/D/E/F
• IP54/55 Water & Dust Intrusion
• PC Serial Interface
• SDM Manual Input* 1
1
• Transparent Data Mode*
• GPS Receiver Option
• VGS-1 Voice Guide / Voice & GPS
Data Storage Option
NX-700/800
NEXEDGE
DIGITAL – GENERAL
• NXDN ® Digital Air Interface
• AMBE+2 ™ VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming* 2
• Paging Call
• Emergency Call
• All Group Call
1
• Status Messaging*
• Remote Stun/Kill* 1
• Remote Check* 1
1
• Short & Long Data Messages*
• GPS Location with Voice* 1
®
• NXDN Scrambler Included
• AES / DES Encryption Options
DIGITAL CONVENTIONAL MODE
• 64 Radio Access Numbers (RAN)
• Individual & Group Selective Call
• Mixed FM/Digital Operation
• Conventional IP Networks
• Site Roaming
DIGITAL TRUNKING MODE
• Individual Private Call
• Group Call & Broadcast Call
• Telephone Interconnect* 3
3
• Transmission Trunked Mode*
• Message Trunked Mode* 3
• Call Queuing with Priority* 3
3
• Late Entry (UID & GID)*
• 4 Priority Monitor ID's* 3
• Remote Group Add* 1
• Failsoft Mode
MULTI-SITE IP NETWORK COMPATIBLE
• 60,000 GIDs / UIDs
• Wide Area Group Call
• Auto Roaming Registration
• Group Registration
® VHF/UHF Digital &FM Mobile Radios
SCAN
• Single / Multi-Zone Scan / List Scan
• Dual Priority Scan (Conventional)
FM MODES – GENERAL
• 25, 20 & 12.5 kHz Channels
®
• FleetSync /II
• DTMF Encode/Decode
• Voice Inversion Scrambler
• Analogue Scrambler Board Capability
FM CONVENTIONAL ZONES
• QT / DQT / Two-Tone
• 5-Tone Encode / Decode
• Call Keys 1-6
• Operator Selectable Tone
• Voting
FM LTR ®
• Kenwood LTR
FleetSync
• PTT ID Digital ANI
• Selective Call & Group Call
• Status Messaging*
• Emergency Status
• Caller ID Display
• Short Text Messages*
MDC-1200
• PTT ID Digital ANI
• Caller ID Display
• Emergency Status
• Radio Check
• Radio Inhibit
Requires NX subscriber unit PC Serial Interface compatible software application
*1
(e.g Kenwood AVL & Dispatch Messaging software) or hardware (e.g. console).
*2 Requires Kenwood OTAP Management software
*3 These trunked features are primarily system programming and operational
dependent. Priority Monitor also requires NX subscriber settings.
http://nexedge.kenwood.com
TRUNKED ZONES
®
Features
® /II (FM)
1
1