Kenwood NEXEDGE NX-200 Function Reference page 179

8 NXDN CONVENTIONAL SYSTEM
8.7 Making a Group Call
Note
This function is unavailable for NX-200S/ NX-300S.
Configuration using KPG-111D/ DN
Configuring the Group Call Display Type (
GID Scan (NXDN)
GID Scan (NXDN) is the function to standby to receive a Group Call from all Group IDs in an NXDN Conventional system.
If this function is enabled, the transceiver is on standby to receive a Group Call from all Group IDs configured for Group ID
List.
If this function is disabled, the transceiver is on standby to receive only the Group Calls from the Group IDs configured for
Selcall on PTT (NXDN), Persistent GID (NXDN).
Note
• This function can be used only if "Group Call" is configured for Selcall on PTT (NXDN).
• If "Group Call" is configured for Selcall on PTT (NXDN) and GID Scan (NXDN) is disabled, the transceiver can initiate a Group Call
only to the Group ID configured for ID List Number (NXDN).
Configuration using KPG-111D/ DN
• Configuring the GID Scan (NXDN) to be enabled or disabled (
• Configuring the Selcall on PTT (
• Configuring the Persistent GID (NXDN) (
Preventing the Functions Working with Group Call Reception from Activating
(Call Alert Inhibit (Group Calls Only))
Call Alert Inhibit (Group Calls only) is the function that disables the Alert Tone, Selective Call Alert LED, Horn Alert,
Vibrator and Caller ID Stack functions when the transceiver receives a Group Call.
Use of this function prevents specific functions from activating as follows even if these functions are enabled or configured
to be enabled when the transceiver receives a Group Call.
• Alert Tone
The following Alert Tones do not sound from the transceiver even if the transceiver receives a Group Call.
Alert Tone (Group Call List)
Group Call (Alert Tone) (Conventional)
• Selective Call Alert LED
A Selective Call Alert LED does not blink even if the transceiver receives a Group Call.
• Horn Alert (Mobile only)
The headlights or the horn of a vehicle being connected to the Horn Alert port does not light or sound even if the
transceiver receives a Group Call.
• Vibrator (Portable only)
The Vibrator does not function even if the transceiver receives a Group Call.
• Caller ID Stack
The Caller ID will not be stored in the transceiver stack memory even if the transceiver receives a Group Call.
FUNC (K)/Ver 4.00
FPRG 8.19.2 General 1 Tab)
See
FPRG 8.3.3 Page 1 Tab)
See
FPRG 8.2.17 Group ID List Number (Persistent GID (NXDN)))
See
FPRG 8.3.3 Page 1 Tab)
See
CONTENTS INDEX 145