Kenwood NEXEDGE NX-200 Function Reference page 161

8 NXDN CONVENTIONAL SYSTEM
8.5 Making an Individual Call
 Selcall on PTT
The transceiver initiates an Individual Call when the PTT switch is pressed on a channel where "Individual Call" is
configured for Selcall on PTT. The Unit ID of the target transceiver can be configured by selecting one Unit ID from the
Unit ID List by using KPG-111D/ DN.
The Unit ID Name or Unit ID of the transmitting transceiver appears on the receiving transceiver display. The receiving
transceiver can respond to the caller by pressing the PTT switch while the caller's ID appears.
The transceiver can record the reception of the Individual Call in the transaction log. The record can be viewed in Stack
Mode and the transceiver can initiate an Individual Call to the target transceiver. (Refer to
History (Stack) on page
Note
For NX-200S/ NX-300S, the transceiver cannot start an Individual Call by using Individual Call Mode.
Operating the Transceiver
 Initiating an Individual Call by list selection
1
Press the Individual
The transceiver enters Individual Call Mode and then the Unit ID
List selection display will appear.
The following operations are identical even if the transceiver
enters Individual Call Mode by a user pressing the Menu key or
using the keypad.
2
Press the Up or Down
to select a Unit ID from the Unit ID List.
Refer to Selecting or Clearing Data from a List on page 42
selection methods.
FUNC (K)/Ver 4.00
38.)
(NXDN), Individual + Status
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411), or press the
(NXDN), or Individual + SDM (NXDN)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
for
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
3.7 Viewing the Receive
key.
Mobile
[ ] or [ ] key (Mobile)
Mobile
INDEX 127