Terminal Descriptions Universal connector It is possible to use a resin-based cover for the Universal connector. Name Description Impedance Ext/Int Speaker Switch Input High Impedance BTL Output + for External Speaker 8 Ω/ 16 Ω BTL Output - for External Speaker Ext/Int MIC Switch Input High Impedance External MIC Input...
Page 4
HANK We are grateful you have chosen KENWOOD for your land mobile radio applications. This instruction manual covers only the basic operations of your NEXEDGE portable radio. Ask your dealer for information on any customized features they may have added to your radio.
Page 5
For information on Li-ion battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). KENWOOD’s involvement in this program is part of our commitment to preserve our environment and conserve our natural resources.
Page 6
Ensure that there are no metallic items located between the transceiver and the battery pack. • Do not use options not specified by KENWOOD. • If the die-cast chassis or other transceiver part is damaged, do not touch the damaged parts.
Page 7
Turn the transceiver power off in the following locations: • Near explosives or blasting sites. • In aircrafts. (Any use of the transceiver must follow the instructions and regulations provided by the airline crew.) • Where restrictions or warnings are posted regarding the use of radio devices, including but not limited to medical facilities.
Page 8
If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, remove the battery pack from the transceiver, and contact your KENWOOD dealer. • Use of the transceiver while you are driving may be against traffic laws.
Page 9
NFORMATION CONCERNING THE ION BATTERY PACK The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to rupture producing flames or extreme heat, deteriorate, or cause other forms of damage to the battery. Please observe the following prohibitive matters. •...
Page 10
• Do not charge the battery near fires or under direct sunlight! If the battery’s protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame.
Page 11
• Do not reverse-charge or reverse-connect the battery! The battery pack has positive and negative poles. If the battery pack does not smoothly connect with a charger or operating equipment, do not force it; check the polarity of the battery. If the battery pack is reverse-connected to the charger, it will be reverse-charged and an abnormal chemical reaction may occur.
Page 26
You can toggle the display between the zone and channel/group ID names and number by pressing the key programmed as Display Format, or by accessing the Menu (NX-200/ NX-300 Only) {page 15}. Note: If the default settings for (NX-200/ NX-300 Only) and the Selector knob have been changed, use the appropriate keys to select the zone and channel/group ID.
Page 33
An alert tone will sound and the transceiver will enter Selcall mode. The calling station’s ID will appear when a Selcall is received (NX-200/ NX-300 Only). You can respond to the call by pressing the PTT switch and speaking into the microphone.
4 When you finish speaking, transmission ends. 5 To turn the VOX function OFF, press and hold the VOX key again, for 2 seconds (NX-200/ NX-300 Only). Note: If a speaker/ microphone is connected to the transceiver while VOX is ON, and the VOX Gain Level is set to a sensitive level, louder received signals may cause the transceiver to transmit.