Honeywell MA-LCD Operating And Installation Manual page 35

Selecting the Zone - using the select key

Selected Zone Number. 'Zone n. 1' = Zone 1
Using the arrow keys
more than 2 devices in alarm condition.

First Alarm details:
'A:C1L1M1 (MCP) 14:34:18 25-04-2023 (1)'
'Label for Panel 1 – MCP Label'
'Alarm module'
= Location on device/address – [A:C1L1M1] = Alarm C1=CPU/Panel number 1, L1= Loop Number 1, M1
= Module address 1. [(PULL)] device type ID = PULL or MCP (manual call point), [14:34:18 25-04-2023]
= Time and Date of activation, (1) = Event number within the selected Zone.
[Label for panel 1] = CPU/Panel label, [MCP Label] = Device Label
[Alarm module] = Device type (module or detector)

Last Alarm details:
'A:C1L1S1 (MULTI) 14:34:36 25-04-2023 (2)'
'Label for Panel 1 – Label for Multi-Dect'
'Alarm Detector'
= Location on device/address – [A:C1L1S1] = Alarm C1=CPU/Panel number 1, L1= Loop Number 1, S1
= Detector address 1. [(MULTI)] device type ID = Multi (Multi criteria detector (opt/heat, opt/heat/IR)),
[14:34:36 25-04-2023] = Time and Date of activation, (2) = Event number within the selected Zone.
[Label for panel 1] = CPU/Panel label, [Label for Multi-Dect] = Device Label
[Alarm Detector] = Device type (module or detector)
M-167.6-MA-LCD-EN / 10.2023
, users can view the details of the device(s) in alarm.
user can highlight the devices in alarm. Arrow keys will also scroll down for
MA-LCD Repeater / Zonal Mimic
35