Ma-Lcd7 Repeat - 'Test' Test Menu - Honeywell MA-LCD Operating And Installation Manual

MA-LCD Repeater / Zonal Mimic

8.1.3 MA-LCD7 Repeat - 'TEST' Test Menu

The Test Menu has four options to select: 'Zone', 'LED', 'LCD' and 'Buzzer'. LED, LCD and Buzzer are internal
function tests that will test the MA-LCD7's internal LED (LED symbol indicators), LCD (screen pixel color test),
and Buzzer (internal buzzer audible test). The TEST option displays the current Zone in test. This option will not
allow users from the MA-LCD7 to initiate Zone Test Mode. This option will display Zone in Test Mode that has
been initiated by the Max control panel. This menu option is not available when MA-LCD7 is programmed as a
MA-LCD7M Virtual Zonal Mimic.
Zones, LED, LCD & Buzzer
 Zones – Displays the Zone in Test Mode that has been initiated from the Max control panel. Zone Test
Mode cannot be initiated from the MA-LCD7. This option is display only. Press the select key
the Zones option.

LED – This option initiates the Local LED test. The LED status symbols will illuminate for 3 seconds and
returns to the previous state. Use the arrow keys
to initiate the Local LED test.

LCD – This option initiates the Local LCD test. The LCD Screen will cycle solid colours and returns to the
test Menu. Use the arrow keys
Local LCD test.

Buzzer – This option initiates the Local Buzzer test. The Buzzer will be active for 3 seconds and then
turns off. Use the arrow keys
Local Buzzer test.
30
to select the LED option. Then press the select key
to select the LCD option. Then press the select key
to select the Buzzer option. Then press the select key
to select
to initiate the
to initiate the
M-167.6-MA-LCD-EN / 10.2023