Honeywell MA-LCD Operating And Installation Manual page 29

Selecting each summary will provide details on the devices, modules, or system disablements. This option
displays the CPU Number, Loop Number, Point Address and Point Label.

Disabled Module Details – 'C1L1M1 (PULL) (Zone n.1 – Label for Zone 1)'
Location of device/address – [C1L1M1] = Alarm C1=CPU/Panel number 1, L1= Loop Number 1, M1 =
Module address 1. [(PULL)] device type ID = PULL or MCP (Manual Call Point), Assigned Zones details
and Zone Label = [Zone n.1 – Label for Zone 1]
Device Label – 'MCP Label'
Use the arrow keys
 Disabled Module Details – 'C1L1M3 (STR) (Zone n.1 – Label for Zone 1)'
Location of device/address – [C1L1M3] = Alarm C1=CPU/Panel number 1, L1= Loop Number 1, M3 =
Module address 3. [(STR)] device type ID = Strobe (General Sounder), Assigned Zones details and Zone
Label = [Zone n.1 – Label for Zone 1]
Device Label – 'Strobe Label'
M-167.6-MA-LCD-EN / 10.2023
to scroll if more than 5 devices are listed.
MA-LCD Repeater / Zonal Mimic
29