Honeywell MA-LCD Operating And Installation Manual page 20

MA-LCD Repeater / Zonal Mimic
The display menu provides options for users to filter the events to be displayed.

Start/End date and time - Using the select key
to edit the start date DD/MM/YYYY. Press the select key again
to select the time (24h format) HH/MM/SS. Press the select key
method is used to select the end date and time.
 Event filter options (Alarms, Pre-Alarms, Test, Disablements, Faults and Other). Option: Yes = event will
be displayed. No = Event will not be displayed. Using the arrow keys
in the event display. Use the select key

Display - Using the arrow keys
will be displayed between the start/end date and time excluding filtered event 'NO' events.
20
select the start date/time. Once selected use the
to events and then arrow keys
, navigate to the Display button and press the select key
to confirm entry. Use the arrow keys
to confirm the entry. The same
, select the options to be filtered
to toggle options: YES/NO.
M-167.6-MA-LCD-EN / 10.2023
. The events