Table of Contents
Advertisement
View status Detectors screen will display the current status of all detectors learnt. Users are able to select the
'CPU' panel, 'Line' loop, and detector number.
HW Type – Displays the device hardware type ID (ION, MULTI, PHOT, PINN, THER)
Name – Displays the device address label (up to 32 characters)
Status – Displays the current devices status (NORMAL, ALARM, PRE-ALARM, DISABLED, FAULT)
Analog Level – Displays the current analogue value. Value displayed as %
Sensitivity – Displays current sensitivity. Sensitivity levels programmable for each device ID.
CPU (Central Processing Unit/Panel Number)
Use the +/- to select the CPU/Panel number or select the number box
Selectable from 1-64 CPUs.
LINE (Loop or Line Number)
Use the +/- to select the Loop/Line number or select the number box
Selectable from 1-8 Loops.
DET. (Detector Number)
Use the +/- to select the Detector number or select the number box
Selectable from 1-99 addresses.
M-167.6-MA-LCD-EN / 10.2023
MA-LCD Repeater / Zonal Mimic
and enter the desired address.
and enter the desired address.
and enter the desired address.
23
Advertisement
Table of Contents
