Table of Contents
Advertisement
Operator Install (continued)
13. BENCH MOUNT
The Operator can be purchased for right-hand or left-hand mounting for Bench Mount configuration. Right hand mounting shown. Left hand mounting is a
mirror image.
• Remove 8 nuts (4 each side) and exchange sides of the mounting brackets and reinstall with mounting pads inboard. See Figure 22
• Attach operator to bench mounting bracket using the four 5/16"- 18 X 1-1/4" carriage bolts, hex nuts, and lock washers provided. See Figure 23
830872-0001
REV 12/07/2022
lock washers provided. Fig. 11
Bench Mount
The Fire Door Operator can be purchased for right-hand or left-hand mounting for Bench Mount configuration. Right hand
mounting shown. Left hand mounting is a mirror image.
1. Weld the door plate assembly (provided) to the door headplate, A minimum of two 1" weld beads are
required on each side of the weld plate for proper attachment. See Fig 9 for proper placement.
2) Remove 8 nuts (4 each side) and exchange sides of the mounting brackets and reinstall with mounting pads
inboard. Fig. 10
3) Attach operator to bench mounting bracket using the four 5/16"- 18 X 1-1/4" carriage bolts, hex nuts, and
lock washers provided. Fig. 11
Fig. 10
Figure 22
4.4
Fig. 10
©Copyright 2022 Wayne Dalton, a division of Overhead Door Corporation
Section 4: Installation
110010.001 Weld plate.
Weld to headplate min. (2) 1.4"
X 1" LG weld beads per side.
If weld plate extends beyond
headplate, weld back side of
weld plate to headplate.
110010.001 Weld plate.
Weld to headplate min. (2) 1.4"
X 1" LG weld beads per side.
If weld plate extends beyond
headplate, weld back side of
weld plate to headplate.
Figure 23
"A"
3-3/4"
Headplate Size
"A" Dim.
14"
6-1/8"
16"
8-1/8"
18" +
9-1/4"
Fig. 9
"A"
3-3/4"
Headplate Size
"A" Dim.
14"
6-1/8"
16"
8-1/8"
18" +
9-1/4"
Fig. 9
Right hand Bench Mount Bracket shown -
Bench Mount Bracket shown
P/N 111509.0001
- P/N 111549.0001
Left Hand Bench Mount Bracket N/S -
P/N 111509.0002
Fig. 11
17
Advertisement
Table of Contents
