Honeywell ULTAMAX PRO FC20 User Manual page 9

GETTING STARTED
Product Assembly
Insert the metal handle into the main body as shown on (Fig.1). Once you hear a
"click", then the handle should be properly installed.
To remove the handle, insert the triangle screwdriver into the handle release hole
and pull the handle upwards as shown on (Fig.2).
1
Metal tube
lock
Battery Pack Installation
Remove the battery pack cover plate by using the provided triangle screwdriver
Insert the battery pack into the slot and replace the battery pack cover (Fig.3).
Note: The battery pack does not need to be taken out unless it needs replacement.
2
Handle release hole
EN | 9
3
Screws
Battery
pack
cover
Battery pack
assembly