Advertisement
Available languages
Available languages
OPERATION (CONTINUED)
Charging the Machine
Put the machine into the charge base, connect one end of the adapter to the
charge base, and plug in the adapter to a socket.
When charging, the display screen shows the battery percentage and light strip
in blue is turning. When it is fully charged, the display screen shows 100% power
and the light strip will remain blue. When put on the charge base while voice
function is on, there will be voice prompts for each steps accordingly.
Ensure to place the charging base in an area close to the wall or a corner to
prevent tripping over it.
Note:
1. If the product will not be used for a
long time, charge it every 3 months to
maintain the battery life.
2. Do not keep the charger plugged in
when the product is fully charged. Put
away the charger for safe keeping.
3. When the machine is used for the first
time, the capacity of the battery pack
of the machine may not be full. Please
charge the battery fully before use.
4. The battery percentage showed on the
display when charging is in a opposite
direction when using. (Fig.13)
5. There is space for power cord at back
side of the charging base, to avoid
power cord to be placed on the floor.
(Fig.14)
13
Charging
Battery %
Charging
status
Remaing
Battery %
Status
in use
14
Power cord
EN | 15
Put the machine
into the charge
base
Base pin
module
plug in the
adapter to a
socket
Back cover
of changing
base
Advertisement
