Honeywell ULTAMAX PRO FC20 User Manual page 19

CLEANING & MAINTENANCE (CONTINUED)
Floor brush assembly cleaning
Use your fingers to buckle the roller brush cover lock and push it upwards, take out
the roller brush cover assembly, pinch the two roller brush locks in the middle, take
out the roller brush assembly, use dry cloth to clean the empty roller position. Use a
small brush to clean the foreign matter wrapped around the roller brush. Clean, wash
the roller brush and the roller brush cover in clean water. After cleaning is complete,
assemble the brush and the cover in place.
Note: 1. If it is not to be used immediately, please air dry the dirty water tank body,
the upper cover of the dirty water tank, the filter sponge, the filter assembly,
the garbage basket, the roller brush body and the roller brush cover plate
assembly in a ventilated place before re-installing them into the machine.
2. The roller brush can also be placed in the accessory holder to dry.
19
Filter sponge
20
Long Cleaning
Brush with
Bristles
Use Short Cleaning Brush with Cutter to
clean brushroll
to hold Long Cleaning
Brush with Bristles
to hold
brush
roller
Charging base
EN | 19
to hold filters