Advertisement
Available languages
Available languages
OPERATION
Fill the Clean Water Tank
1. Hold the handle of the tank and rotate counterclockwise to remove the tank.
2. Open the cover of the clean water tank, and pour clean water to the maximum
water level.
3. Close the cover to ensure that it is tight, and then put the clean water tank
back into the machine.
4. Hold the handle of the tank and rotate downward clockwise (lock) until you
hear a click for proper installation.
5. Water temperature requirement: below 104°F / 40°C.
6. Cleaning Solution: Only use the provided cleaning solution. Using a cleaning
solution other than what was provided may damage the machine. Pour 2.5
bottle cap of the cleaning solution and add clean water until the maximum
water line (ratio of 1:40).
9
Clean water
tank cover
Clean water
tank filling port
Using the Machine
1 The On/Off button is located on the top of the handle. Press once to turn on the
machine, auto mode will be the default mode. Press the mode button to switch to
Max mode. Press the On/Off Button again to turn off the machine. (Fig.10)
2. When using the machine, press and hold the water spray button to spray water on
the floor. Release the button to stop spraying. (Fig.11)
3. When the machine is power on or charging, press the mute button to stop the
voice prompt, and press the mute button again to resume the voice prompt. When
the voice function is on, you can switch the language by pressing mute button
for 3 seconds and switch among 5 language voices, in a sequence of English,
German, Italian, French, and Spanish. (Fig.11)
Max line
EN | 13
Advertisement
